Sew Lotus Skirt

Materials:

• 1 yard satin (for leaves on top and for leaf apron skirt)
• tutu
• child’s or women’s small tank top

Directions:

From the satin, cut out a front and back for 4 large petal shapes (mine were 8″ by 7″ and I eyeballed the shape) and 3 smaller petal shapes (mine were 8″ by 7″). Cut out a 6″ wide strip across the entire width of the fabric (your fabric will probably be 54″ to 60″ wide) for the sash.

Put the petal pieces right sides together, and sew around the two sides. Turn over & press.

Press the 6″ wide strip in half lengthwise wrong sides together, and then press the two raw, long edges in 1/2″.

Arrange the larger leaves side-by-side with the top raw edges aligned. Place the smaller leaves on top, over where the larger leaves meet, as pictured above. Pin in place and sew together about 1/4″ from the raw edge.

Measure your child’s waist to find out how long you want the waistband of the leaf apron to be, and then gather the tops of the leaves to fit. In this case, I wanted the skirt to measure 21″ long.

Tuck the leaves about 1/2″ into the waistband you’ve previously folded and pressed. Pin (a lot) because satin is slippery!

Press the short ends of the waistband inwards and press (so there are no raw edges showing on the ends of what will be the tie). Sew the layers together with a topstitch about 1/4″ from the open fold of the waistband, sew the tie ends shut at the same time (as shown below).

For a matching top, find a green tank top that’s your child’s size (if not, you can do what I did and alter a women’s small tank top by taking in the shoulders and sides). Make small leaves in the same manner as the large leaves made for the skirt (mine measured about 2″ by 3″). Pin them together side-by-side, gather them, and then turn the raw edges in, pin, and stitch to the neckline as pictured above.